If you are new to LSI MegaRAID and LSI SAS HBA controllers, this guide will provide a general overview of applicable management utilities and firmware flash utilities, and recommended usage scenarios for these tools.
MegaRAID Storage Manager software enables you to configure, monitor, and maintain storage configurations on LSI SAS controllers. The MegaRAID Storage Manager graphical user interface (GUI) makes it easy for you to create and manage storage configurations. MegaRAID SAS 9266-8i. Windows Server 2008 x86 and x64,Windows 7 x86 and x64,Windows Server 2008 R2 x86 and x64,Windows 8 x86 and x64,Windows Server 2012 x86 and x64,Windows 8, Windows Server 2012 x64,Windows 8.1 x86 and x64,Windows Server 2012 R2 x86 and x64. MegaRAID Driver. Version: 6.603.55.00.1. File Size: 113 KB. 1.0 Introduction for Windows 7 and Server 2008-R2 Windows 7 is the client release of. This driver completes the path to the LSI controller or processor with an. LSI 2208 9286-8e MegaRAID controller beeping when connected to 24-bay NexentaSTOR JBOD enclosure. Firmware and drivers are all 5.5 for Windows. Sans Digital NexentaStor. Windows-server-2008-r2 raid hardware-raid lsi battery. Browse other questions tagged windows-server-2008-r2 raid hardware-raid lsi battery or ask your own question. LSI 2108/2208 SAS MegaRAID Configuration Utility User's Manual. Ae 1 I e LSI MegaRAID Sae. 2108/2208 SAS MegaRAID settings before you install an operating system and other software drivers. Note: If you do not wish to configure LSI. 1-2 RAID Levels Supported by the 2108/2208 Controller The LSI Embedded MegaRAID Software Configuration.
LSI MegaRAID Management Utilities:
StorCli
Command line interface
Supported OS:
Windows Server 2008/R2/2012
Windows 7/8/8.1
Red Hat Enterprise Linux 5.8 and up
SUSE Linux Enterprise Server 10 SP4 and 11 SP2
VMware ESX 4.0 and up
Solaris
FreeBSD
EFI shell
Supported controllers:
926x, 927x, 928x, and 924x 6Gb/s controllers
936x, 938x, and 934x 12Gb/s controllers
No built-in alerts
Text output from all commands, allowing for easy integration into scripts
Supports legacy MegaCli commands, to allow for easy import of existing MegaCli scripts
Typical usage:
Primarily used for current generation MegaRAID controllers, 6Gb/s and above
Headless installations where GUI utilities would not normally be accessible
Bulk creation and management of RAID sets via scripts or pre-formatted commands
Small and large storage clusters
MegaCli
Command line interface
Supported OS:
Microsoft Windows Server 2008 R2
Microsoft Windows 7
Red Hat Enterprise Linux 5.8 and up
SUSE Linux Enterprise Server 10 SP4 and 11 SP2
MSDOS 6.22 and FreeDOS 1.0
Supported controllers:
926x, 927x, 928x, and 924x 6Gb/s controllers
83xx, 840x, 870x, and 888x 3Gb/s controllers
No built-in alerts
Text output from all commands, allowing for easy integration into scripts
Does not support CacheVault BBUs or 12Gb/s controllers, use StorCli instead
Typical usage:
Primarily used for legacy MegaRAID controllers, 6Gb/s and below, or those unsupported by StorCli
Headless installations where GUI utilities would not normally be accessible
Bulk creation and management of RAID sets via scripts or pre-formatted commands
Small and large storage clusters
MegaRAID Storage Manager
Graphical interface
Supported OS:
Windows Server 2008/R2/2012
Windows 7/8/8.1
Red Hat Enterprise Linux 5.8 and up
SUSE Linux Enterprise Server 10 SP4 and 11 SP2
Supported controllers:
All MegaRAID series controllers
Built in alert system via SNMP agent
Out of band management via built in web server
Notes:
Out of band management requires a running OS for the web server. You will not be able to manage your controller remotely if the system is hung or outside of an OS.
Out of band management also requires a copy of MegaRAID Storage Manager installed on client systems to attach to the host
Typical usage:
Full GUI operating systems
NAS solutions from Open-E
Single servers, or small storage clusters
It is recommended that connected clients use Windows, since installation support is limited on Linux/UNIX clients. Storage hosts can use any supported OS.
Windows Server 2008 R2 Drivers
All OS-based MegaRAID management utilities support the complete MegaRAID feature sets, including array creation, configuration, erasure, expansion, and migration, as well as firmware updates and drive fault indicators. The only major differences between them are in terms of access methods and operating system support.
LSI Web BIOS
Pre-boot utility
OS independent
Supported controllers:
All MegaRAID series controllers
Limited to foreground tasks only. Background initialization for RAID 5 and RAID 6 occurs once the system boots to an OS
Megaraid Controller Driver Windows Server 2008 Windows 7
LSI SAS HBA Management Utilities:
SAS2IRCU (6Gb/s controllers) and SAS3IRCU (12Gb/s controllers)
Command line interface
Supported OS:
Windows Server 2003/2008/R2/2012
Windows XP/Vista/7/8/8.1
MSDOS 6.22 and FreeDOS 1.0
Solaris
FreeBSD
Linux kernel 2.6 and higher
EFI shell
VMware ESXi 5.0
Can be used to identify failing drives by blinking the fault LED, and displays model and serial information on attached enclosures and drives
Array status and rebuild support for Integrated RAID (IR) firmwares
SAS2FLASH (6Gb/s controllers) and SAS3FLASH (12Gb/s controllers)
Command line interface
Supported OS:
Windows Server 2003/2008/R2/2012
Windows XP/Vista/7/8/8.1
MSDOS 6.22 and FreeDOS 1.0
Solaris
FreeBSD
Linux kernel 2.6 and higher
EFI shell
Primarily designed for firmware flashing, and the DOS version comes bundled with firmware binaries
Can be used to find model and serial number information from controllers
SAS BIOS Configuration Utility
Pre-boot utility
OS independent
Manages primary/secondary boot drives
Supported controllers:
All LSI SAS HBAs
Megaraid Controller Driver Windows Server 2008 Windows 7
If you need assistance obtaining these utilities, head to this guide for instructions on how to locate resources for your controller.